Last updated: · 9 min read

A 3D printer turns a digital design into a physical object, one layer at a time. Which one is right for you depends almost entirely on what you want to make. A machine that's perfect for big functional parts can be useless for small detailed miniatures, and the cheapest printer to buy can turn out the most expensive to run. A proper 3D printer comparison looks at the technology, build size, materials, running costs and support — not just the price tag.

Key takeaways

  • Which one is right for you depends almost entirely on what you want to make.
  • A machine that's perfect for big functional parts can be useless for small detailed miniatures, and the cheapest printer to buy can turn out the most expensive to run.
  • A proper 3D printer comparison looks at the technology, build size, materials, running costs and support — not just the price tag.
  • Most home printers use one of two technologies.

So which 3D printer should you buy? It comes down to the size and detail of the objects, what they need to be made from, and how much time you're willing to spend tuning and maintaining the machine. This guide walks through the comparisons that actually matter — and the ones you can ignore.

Build size is the biggest object the printer can make in one piece, given as width, depth and height.

The two main technologies: FDM and resin

Most home printers use one of two technologies. FDM — fused deposition modeling — melts plastic filament and lays it down layer by layer. It's the most common type, the cheapest to run, and the best pick for larger functional parts, prototypes and household objects. Resin printing cures liquid resin with light. The detail is far finer and the surfaces much smoother, which makes it the better choice for miniatures, jewelry and dental models. That FDM vs resin printer choice is the first decision in any 3D printer buying guide, and it matters more than brand: pick the technology that suits the objects you want to make, then compare printers within it.

Detail isn't the only trade-off. Resin is a chemical: gloves, ventilation, careful handling, and every part needs washing and curing after it prints. FDM is simpler and safer to set up, but you can see the layer lines and fine detail is limited. Pick the technology for the objects, not the price. A resin printer bought for large functional parts will disappoint, and an FDM printer bought for fine miniatures will too.

FDMResin
How it worksMelts plastic filament and lays it down layer by layerCures liquid resin with light
DetailLayer lines are visible; fine detail is limitedFar finer detail and much smoother surfaces
Best forLarger functional parts, prototypes and household objectsMiniatures, jewelry and dental models
Running costThe cheapest to runMaterial, resin vats, and a wash-and-cure station add to the cost
Safety and setupSimpler and safer to set upA chemical: gloves, ventilation, careful handling, and every part needs washing and curing after it prints
MaintenanceNozzle cleaned or replaced, bed leveled, belts checkedVat cleaned, screen checked, resin handled safely

Build size: what you can actually print

Build size is the biggest object the printer can make in one piece, given as width, depth and height. Bigger means larger objects and fewer parts to join — but also a bigger machine, a higher price and slower prints. Before comparing build sizes, measure the largest object you actually want to make, then add a margin for the supports and base that printing needs.

A common mistake is buying the biggest printer on the shelf and then printing small objects on it. A large printer takes longer to heat, wastes more filament when a print fails, and eats more space. Buy the build size that fits what you'll print most often, not the biggest thing you might print once.

Materials and what they are for

FDM printers run on filament, and the usual types are PLA, PETG, ABS and TPU. PLA is the easiest to print and the best starting point for beginners and decorative objects — but it's brittle and softens in heat. PETG is stronger and stands up to weather better, a solid choice for functional parts. ABS is stronger still and more heat-resistant, but harder to print and it needs ventilation. TPU flexes, so it suits phone cases, gaskets and anything that needs to bend.

Resin printers use liquid resin — standard, tough, flexible and castable types, each made for a different job, and the resin has to match the object. Whichever technology you choose, work out the material cost per print, not just the price of the printer. A cheap printer with pricey material can cost more over a year than a dearer printer with cheap material.

MaterialWhat it is good forLimits
PLABeginners and decorative objects — the easiest to printBrittle, and softens in heat
PETGFunctional parts; stronger and stands up to weather better—
ABSStronger, more heat-resistant partsHarder to print; needs ventilation and an enclosure
TPUPhone cases, gaskets, anything that needs to bend—
Resin (standard, tough, flexible, castable)Each type is made for a different job; the resin has to match the objectGloves, ventilation, washing and curing after every print

Running costs and maintenance

The printer's price is only the first cost. Running costs mean material, replacement nozzles or resin vats, build plates, and the electricity behind long prints — a 20-hour print uses a noticeable amount of power, and a failed print wastes material and time. Budget for spare parts and for the learning curve: the first months include failed prints. That's normal.

Maintenance comes with the territory. FDM printers need the nozzle cleaned or replaced, the bed leveled and the belts checked. Resin printers need the vat cleaned, the screen checked and the resin handled safely. A printer with good documentation, spares you can actually buy and an active user community is easier to live with than a cheaper one with none of those.

What to compare before you buy

Before you buy, compare the print technology, build size, materials, running costs, noise — it matters if the printer sits in a living space — and the support on offer: documentation, spare parts, warranty and user community. Read reviews from people printing the same kind of objects you want to print, not just the headline review, and check the date. Models change fast; a review from two years ago may describe a printer that's already been replaced. For the best 3D printer for beginners, ease of setup, a helpful user community and spare parts matter more than the longest feature list — a machine you can keep running beats one you cannot.

Work out the total cost, not the headline price: printer, material, spare parts, and the extras it needs to work well — an enclosure for ABS, a wash and cure station for resin. And read the return policy. A printer that doesn't work as expected is a large thing to send back.

FDM vs resin: strengths and limits

FDM: strengths

  • The cheapest to run.
  • Simpler and safer to set up.
  • The best pick for larger functional parts, prototypes and household objects.

FDM: limits

  • Layer lines are visible and fine detail is limited.
  • A printer bought for fine miniatures will disappoint.

Resin: strengths

  • Far finer detail and much smoother surfaces.
  • The better choice for miniatures, jewelry and dental models.

Resin: limits

  • Resin is a chemical: gloves, ventilation and careful handling.
  • Every part needs washing and curing after it prints.
  • A resin printer bought for large functional parts will disappoint.

Which printer fits you

  • Beginners: FDM with PLA — the easiest to print and the cheapest to run.
  • Miniatures, jewelry and dental models: resin.
  • Large functional parts and prototypes: FDM.

Common mistakes

The usual mistakes: buying on price alone and finding the running costs or maintenance later. Picking the wrong technology for the objects — FDM for fine miniatures, resin for large functional parts. Buying the largest build size available. Not budgeting for failed prints in the first months. And ignoring safety — resin handling and ABS fumes both need ventilation and care.

Frequently asked questions

Should I buy an FDM or a resin 3D printer?

FDM suits larger functional parts and beginners. Resin suits small, highly detailed objects such as miniatures. Choose by the objects you want to make.

What size 3D printer do I need?

The build size that fits the objects you'll print most often, with a margin for supports. Buying the largest available printer is usually a mistake.

What does a 3D printer cost to run?

Material, replacement parts, electricity for long prints, and the material lost to failed prints. Check the material cost per print before you buy.

Is 3D printing safe at home?

FDM printing is generally safe at home with basic care. Resin printing needs gloves, ventilation and safe handling of the resin and the waste. ABS printing needs ventilation.

Need help?

If this guide does not answer your question, the directory lists every program and tool on this site.

Browse the directory

Source: National Institute for Occupational Safety and Health (NIOSH)

Sources